Skip to Main Content Skip to Footer Content

Rainbow Restoration Blog

Water Damage

Classes and Categories of Water Damage (+6 Water Damage Tips)

Two people wearing green rubber boots standing on a wet floor.

There are three categories of water damage based on the level of contamination and potential health risks. Category 1, known as Clean Water, originates from sanitary sources like broken supply lines. Category 2, or Grey Water, contains significant contamination, potentially causing discomfort or illness if consumed. Category 3, referred to as Black Water, is highly contaminated with pathogenic agents and fecal matter, posing severe health risks for anyone who comes in contact with it.

Whether it's a small leak or a full-blown flood, water damage can be severe and cause extensive property damage. In fact, nearly 40% of real estate losses are due to water damage, highlighting the significant impact it can have on residential and commercial properties.

There are three main categories of water damage: Clean Water (Category 1), Grey Water (Category 2), and Black Water (Category 3). Clean Water originates from a sanitary source, Grey Water contains significant contamination, and Black Water is highly contaminated and poses severe health risks. By knowing the severity of the situation, you can take proactive steps for water damage restoration and protect occupants and the property from further harm.

This article will explore the various categories of water damage — from minor annoyances to major disasters — to help you accurately assess water damage situations in residential or commercial property. You’ll also find practical tips and expert advice on how to minimize damage and safeguard the property effectively.

Categories of Water Damage

Specific steps are necessary to reduce property destruction, depending on the type of water damage. According to the Institute of Inspection Cleaning and Restoration Certification (IICRC), which sets the standards for the cleaning industry and water damage restoration training, there are three levels or types of water involved in damages: clean water, grey water, and black water.

Graphic showing three categories of water damage.

Category 1: Clean Water

Clean water — or Category 1 water damage — refers to water that originates from a sanitary source. Category 1 water poses no substantial risk from exposure to dermal, ingestion, or inhalation. Here are some examples of what classifies as clean water:

  • Potable water: Water that comes from a clean source, such as a faucet, water supply line, or rainwater.
  • Rainwater: Fresh rainwater that is collected before coming into contact with contaminants.
  • Leaking pipes: Water from a supply line leak or a burst pipe that carries clean water.
  • Melting snow: Snow that melts and enters a property without picking up contaminants.
  • Condensation: Water vapor that condenses on surfaces due to temperature differences, usually from air conditioning units or humidifiers.
  • Overflowing sinks/bathtubs: Clean water that overflows from sinks, bathtubs, or appliances, such as washing machines and dishwashers.

Image showing pipe leak.

Category 2: Grey Water

Grey water typically originates from household appliances, sinks, showers, and washing machines. Grey water contains contaminants, such as soap, food particles, grease, and other organic matter. This type of water damage is common in a flooded basement, overflowing washing machines, or leaks from appliances like dishwashers.

Common examples of Category 2 water damage in homes and businesses include:

  • Washing machine overflow: Water from a washing machine overflow, containing detergent and dirt from laundry.
  • Dishwasher leakage: Wastewater from a malfunctioning dishwasher that may contain food particles and detergent.
  • Sink drainage: Water from kitchen or bathroom sinks contaminated with soap, food residue, and grease.
  • Shower/bathtub overflow: Water from an overflowing shower or bathtub, typically containing soap scum and body oils.
  • Toilet overflow: Overflow from a toilet containing urine and water but no fecal matter.
  • Sump pump failures: Water from a failed sump pump or basement drainage system, possibly containing cleaning agents and debris

Category 3: Black Water

Category 3 water, or black water, is the most hazardous type of water damage. It contains harmful pathogens, chemicals, and other contaminants that can cause severe illness or even death if ingested, inhaled, or exposed to the skin. Category 3 damage requires immediate attention and should be restored by a professional who has experience in biohazard cleanup services.

Common examples of Category 3 water damage include:

  • Sewage backup: Water contaminated with raw sewage from toilet overflows, sewer line backups, or septic tank malfunctions.
  • Floodwaters: Water from natural disasters such as hurricanes, storms, or heavy rains mixed with soil, debris, and potentially harmful substances.
  • Standing water: Stagnant water that has been left untreated for an extended period, leading to microbial growth and contamination.
  • Chemical spills: Water contaminated with hazardous chemicals from industrial spills, leaky containers, or improper disposal practices.
  • Animal waste: Water contaminated with feces, urine, or other bodily fluids from animals, including wildlife or pets.
  • Microbial growth: Water contaminated with mold, fungi, or bacteria due to prolonged exposure or inadequate cleanup of water damage incidents.

Hazard removal professional removes chemical spill.

Classes of Water Loss

Classes of water loss categorize the extent of water damage and the expected rate of evaporation based on the quantity and type of wet materials present in a home or business. Understanding these classes is crucial for determining the appropriate mitigation and restoration strategies. Here are the four classes of water loss:

  • Class 1: Slow rate of evaporation: Class 1 water loss impacts only a portion of a room, typically affecting materials with low permeance or low porosity, such as particle board, plywood, structural wood, vinyl composition tile, and concrete.
  • Class 2: Fast rate of evaporation: Class 2 water losses affect the entire room and involve materials like carpet and cushion. Water seepage up walls is limited to less than 24 inches, with moisture retained in structural components.
  • Class 3: Fastest rate of evaporation: Class 3 water losses typically stem from overhead sources, saturating insulation, ceilings, walls, carpet, cushion, and subfloor throughout the affected area.
  • Class 4: Specialty drying situations: Class 4 water losses entail specialized drying scenarios with materials exhibiting very low permeance or porosity. Examples include hardwood, plaster, brick, concrete, stone, subfloors, and crawl spaces.

What Should You Do if You Think You Have Water Damage?

When water damage is suspected on a property, taking swift action is crucial to protect occupants and mitigate further structural damage. Here's what to do as soon as water damage is discovered:

  1. Prioritize safety: Turn off electricity in the affected area to help control electrocution hazards if safe to do so.
  2. Identify the source: If possible, locate and address the source of the water to prevent further damage.
  3. Remove excess water: Safely remove excess water using towels, mops, or a wet/dry vacuum to prevent further saturation of materials.
  4. Enhance ventilation: Enhance ventilation by opening windows and doors. Use fans or dehumidifiers, if safe, to speed up the drying process and prevent types of mold from growing.
  5. Contact professionals: Call water damage restoration professionals with the expertise and equipment to effectively mitigate, dry, and restore residential and commercial properties.

CTA for a post about mold identification with an image of a professional removing mold.

The Rainbow Restoration® Water Damage Restoration Process

Seeping water damage is progressive and pervasive. It poses significant risks to the structural integrity of buildings, the health of occupants, and can lead to substantial financial loss.

The service professionals at your local Rainbow Restoration are professionally trained to handle various types of water damage. Once they arrive at a home or business, they quickly assess the situation and plan the restoration process, which includes:

  • Identify the cause of the damage and mitigate its spread: The team promptly locates the source of water damage to halt its spread. This crucial first step prevents further damage to the property and reduces the restoration timeline.
  • Assess the extent of the damage and make a restoration plan: With a thorough evaluation, Rainbow professionals assess the extent of the water damage. Utilizing this comprehensive analysis, they craft a detailed restoration plan, ensuring a targeted and efficient approach to recovery.
  • Begin restoration using Rapid Structural Drying principles: The restoration process is initiated by implementing the principles of Rapid Structural Drying. This method involves advanced techniques such as water extraction to remove standing water, enhancing airflow to expedite evaporation, deploying dehumidifiers to eliminate moisture from the air, and managing temperature to facilitate drying. These steps are critical for preventing mold growth and ensuring the property is returned to its pre-damage condition swiftly.

Mold, mildew, and dry rot may begin to grow in as little as 24 hours, making structural damage and contents damage common. Rainbow Restoration service professionals use the practice of Rapid Structural Drying to begin each restoration process. Water damage services are complemented by additional services such as mold removal and remediation.

Categories of Water Damage FAQ

What Are Common Causes of Water Damage?

Water damage can occur due to various factors, including leaking pipes, faulty plumbing fixtures, appliance malfunctions, clogged drains, and natural disasters.

Sewage backups in basements, HVAC system issues, foundation cracks, and condensation can also contribute to water damage. Regular maintenance and prompt attention to such issues can help prevent water-related incidents and protect properties from extensive damage.

What Is the Biggest Concern With Water Damage?

The biggest concern with water damage is the potential for extensive property damage and the associated financial costs of restoration and repair. Additionally, water damage can lead to mold growth and pose health risks to occupants if not quickly addressed using the right methods and equipment.

What Does Water Damage Look Like?

Water damage can manifest in various ways, including discoloration or staining on walls or ceilings, peeling or bubbling paint, warped or swollen wood surfaces, musty odors, and visible mold growth. Additionally, water damage may result in sagging or soft spots in flooring, as well as standing water or puddles in affected areas.

How Do You Know If Water Damage Is Serious?

Water damage is considered serious if it affects structural components such as walls, floors, or ceilings. You’ll notice visible signs of deterioration, such as warping, buckling, or sagging. Additionally, extensive water damage may result in the growth of mold and mildew, accompanied by musty odors and discoloration of surfaces.


This article is intended for general informational purposes only and may not be applicable to every situation. You are responsible for determining the proper course of action for your property. Services should be performed by licensed and experienced professionals. Rainbow Restoration is not responsible for any damages that occur as a result of this blog content or your actions. For the most accurate guidance, contact a Rainbow Restoration professional for a custom, on-site assessment.

Find a Professional Near Me

Let us know how we can help you today.

Call us at (855) 724-6269
Rainbow Restoration work vehicle with Neighborly wrap.